Datacard® IDCentre™ Identification Software
Please contact the sales and service provider in your geographic area to help you with your technical questions.
Click here to locate your Datacard sales and service representative.
For immediate assistance Datacard has Customer Support Centers that are available to serve customers in the Americas, EMEA, and Asia Pacific regions. We will be able to provide you with the authorized service provider nearest you.
- Americas +1 800.328.3996 or +1 952.988.2316
- EMEA (Europe, Middle East, Africa) +44 1489555627
- Asia Pacific +852 2821 0121
Software Upgrades items
IDCentre v5.2 Plug-in for the CD800 Printer
Updated 5/03/2011
Download and install this plug-in if you are using a Datacard CD800 printer with IDCentre v5.2 identification software. The plug-in is required to support card production features such as K panel printing, topcoat application, and magnetic stripe encoding.
This plug-in replaces the plug-in included with the v2.0 printer driver installation. The plug-in included with the driver installation does not function correctly with IDCentre v5.2 software.
The plug-in requires the following to install and function:
- IDCentre v5.2
- XPS Card Printer Driver v2.0
- Windows XP Service Pack 3
**Note**
- This Plug-in will not work with any ViaNet Workstation versions.
- This Plug-in will only work with version 6.5.of WebID Workstation,
Datacard® DSLR-1 Camera Plug in for ID Works, IDCentre, WebID
Updated 1/11/2012
If you are using ID Works, IDCentre, or WebID and would like to incorporate
facial capture functionality with 1 of 11 Canon® DSLR camera models, download
and run the attached file.
The DSLR-1 camera plug-in v1.1 software provides integrated photo capture support for the following Canon cameras
- Canon EOS-1D Mark III
- Canon EOS 40D
- Canon EOS-1Ds Mark III
- Canon EOS 450D/Rebel XSi
- Canon EOS 5D Mark II
- Canon EOS 50D
- Canon EOS 7D
- Canon EOS-1D Mark IV
- Canon EOS 1100D/Rebel T3
* These cameras have been tested by Datacard.
Datacard supports the use of DSLR-1 camera plug-in software with the following applications:
- Datacard ID Works® v6.5 (Basic, Standard and Enterprise)
- Datacard ID Works® v5.1 with Service Pack 1 applied (Basic, Standard and Enterprise)
- Datacard IDCentre™ v6.5 (Bronze, Silver and Gold)
- Datacard IDCentre™ v5.2 (Bronze, Silver and Gold)
- Datacard WebID™ Workstation v6 or later
Operating systems supported by the applications listed above are supported by the DSLR-1 camera plug-in with the following exceptions:
- Windows 2000 is not supported by the camera plug-in.
- Windows XP 64-bit is not supported by the camera plug-in.
NOTE: When using the camera with ID Works/ID Centre, make sure the dial on the camera is set to P. If this is not set you will not see the menus to configure the camera.
ID Works v6.5 Support for 64-bit Microsoft® Operating Systems
Updated 1/08/2010
For customers who wish to use Datacard® ID Works® Identification Software v6.5 and Datacard® IDCentre™ Identification Software v6.5 on Microsoft® 64-bit Operating Systems, download and run the attached file. The upgrade installs the necessary 64-bit prerequisite software enabling you to run on that operating system. A 64 bit printer driver for your printer is also required.
IDCentre software v6.5 upgrade
Updated 10/08/2008
If you are using IDCentre v6.0 software and plan to continue to use Microsoft Windows 2000 or XP operating system, you do
not need to upgrade to v6.5 as no new features have been added. If you do not have a
card printer driver that is Vista operating system compatible, or if you are using the
Finger Pointe solution, do NOT upgrade. If you are using Photo
Pointe solution, you must have v6.5 or greater and if you are using Signature
Pointe solution, you must have v6.5. All components must be Vista operating system compatible for the solution to run on Vista.
Before installing the upgrade, read the complete description. If you are using
Capture Pointe solutions, you must use the Vista operating system compatible software version and hardware noted in the description. If your card printer is not Vista operating system compatible, please do
not upgrade.
If you have any questions regarding upgrades, please contact your Datacard service provider.
This upgrade will install the new software for the following products:
- Datacard® IDCentre™ Gold software
- Datacard® IDCentre™ Gold Production software
- Datacard® IDCentre™ Gold Designer software
- Datacard® IDCentre™ Silver software
- Datacard® IDCentre™ Silver Production software
- Datacard® IDCentre™ Silver Designer software
- Datacard® IDCentre™ Bronze software
- Datacard® IDCentre™ Lite software
- Datacard® IDCentre™ View software
Before installing the software, please make sure that you are using IDCentre v6.0. If you have an older version of IDCentre software, please contact your Datacard Service Provider to discuss an upgrade. If you upgrade to IDCentre v6.5 software to run on Vista operating system and are using any of the software offerings listed below, you must also upgrade those applications to be compatible. If you are using hardware that is not Vista operating system compatible, do not upgrade.
- Datacard® Visitor Pointe™ software v6.5 upgrade
- Datacard® Photo Pointe v7.1 software upgrade
- Datacard® Signature Pointe™ v6.5 software upgrade
