Loading Cards into Printer - SD460 with Laminator


If you are using a manual feed printer, skip this step and keep a supply of blank cards close to the printer. Do the following to load cards into the printer:

  • Open the input hopper.
  • Load the cards into the input hopper. A diagram inside the hopper shows the correct orientation for each type of card.
    • Cards can stick together. Slide or fan the cards to separate the edges before placing them in the hopper. Handle cards by their edges only.
    • Insert ISO magnetic stripe cards with the stripe (back side) facing down and toward the right.
    • Insert smart cards with the smart card chip facing up and toward the back of the hopper.
  • Close the input hopper.
The End